FIND THE SUITABLE PRODUCT
DT 100 Quick-Lift® Adhesive Membrane
DT 100 Quick-Lift® Adhesive Membrane
Residue-free removal of textile, PVC, CV and rubber flooring
DT 100 Quick-Lift® Adhesive Membrane
Residue-free removal of textile, PVC, CV and rubber flooring
- Dry bonding for the residue-free removal of flooring
- Prevents the formation of waves, bumps and blisters
- Quick renovation without drying times
- EMICODE EC 1 PLUS; very low emissions
EMICODE:
EC1 PLUS
THOMSIT DT 100 is an adhesive membrane coated on both sides with adhesive. Floor coverings fixed with THOMSIT DT 100 are firmly attached to the substrate and do not tend to form bumps or blisters. The membrane is used for the removable dry bonding of dimensionally stable flooring materials such as:
- tufted carpeting with a fleece, foam or textile backing
- Kugelgarn
- carpet tiles
- PVC and CV flooring
- Noraplan and Norament; observe the laying instructions of the floor covering manufacturer!
Contact THOMSIT to enquire about suitable types of flooring.
THOMSIT DT 100 can be used on substrates ready for flooring installation and on firmly adhering floor coverings with a smooth surface. Do not use on natural stone (e.g. marble or travertine) and unsealed parquet if these floors are intended for later use. For these cases, install THOMSIT T 590 FixChange or THOMSIT TF 201 Sheet Membrane. THOMSIT DT 100 can be removed without residue from smooth, firm substrates. Do not use for bonding unwieldy coverings with high internal stresses (e.g. needle punch).
THOMSIT DT 100 meets the highest demands for occupational safety, indoor air quality and environmental compatibility.
DT 100 Quick-Lift® Adhesive Membrane
Residue-free removal of textile, PVC, CV and rubber flooring
-
Technical data sheet
-
Thomsit: We can dance at 5 weddings! Installation systems for luxury vinyl tiles
-
Licensing GEV EMICODE (EC1 PLUS)