DANCING

IN THE RAIN!

Installation systems for luxury vinyl tiles in wet rooms

Get your bathroom off to a kick-start!

 

Safe and reliable installation of luxury vinyl tiles in wet rooms – no problem at all with our new Thomsit systems!

 

Design flooring or, to be precise, luxury vinyl tiles (LVTs) has become the latest trend in bathrooms and other wet areas. Creative freedom is almost limitless as you can choose from a multitude of design options. The spectrum covers deceptively real stone and parquet imitations, but also all kinds of creative patterns and shapes. This great variety can be used to transform the bathroom into an individual lifestyle space.

 

Thomsit has now come up with two professional systems for the installation of luxury vinyl tiles in bathrooms:

 

The system Bathroom Basic features very easy installation and can be used in many rooms with low exposure to water.

 

Bathroom Plus consists of waterproof components and has been designed for higher moisture loads in bathrooms with open showers. It is even suitable for use as a shower floor.

 

With Thomsit you can tackle every site – including bathrooms. Make it!

 

Join the trend and make use of luxury vinyl tiles in the attractive bathroom (renovation) segment! Thomsit supports you with top quality products that feature safe and easy application. On top, we offer expert advice by our experienced flooring advisors.

BATHROOM BASIC

INSTALLATION SYSTEM FOR WATER EXPOSURE CLASSES W0-I AND W1-I

Naturally, bathroom floors are exposed to splash water, especially in the area surrounding showers and bathtubs. When installing our Basic Bathroom System, you will be on the safe side for many wet room applications. One of the most important prerequisites is an expertly prepared substrate. Thomsit TDB 100 Waterproofing Membrane and Thomsit TDB 12 Sealing Tape reliably protect the floor against the penetration of moisture. Another star in the system is our new adhesive Thomsit K 190 F for the quick and comfortable installation of luxury vinyl tiles. Needless to say that the complete floor structure is environmentally compatible consisting exclusively of very low-emission components.

APPLICATION AREAS ACCORDING TO WATER EXPOSURE CLASSES W0-I AND W1-I (DIN 18534

DIN 18534 specifies the requirements to be fulfilled for waterproofing areas exposed to moisture. These specifications must be observed when planning the floor structure of specific rooms or buildings. Suitable installation systems and materials need to be separately agreed with the building client. They cover the following areas of application:

  • Bathtubs without shower resp. with shower and shower enclosure (W1-I)
  • Showers with shower tray and shower partition (W1-I)
  • Level-access showers with shower partition (W1-I)
  • Guest toilets without shower (W0-I)

THOMSIT K 190 F

Fiber-reinforced PVC and rubber adhesive:

 

 

  • Easy application and spreadability
  • Long, flexible open time
  • Fiber-reinforced, therefore high shear strength
  • Good wet adhesion paired with a hard adhesive bed
  • Low consumption

THOMSIT TDB 100 COMBINED WITH TDB 12

Waterproofing membrane and sealing tape:

 

  • Especially for use in wet rooms
  • Reliable moisture protection
  • Crack-bridging
  • Easy gluing to the substrate

BATHROOM PLUS

INSTALLATION SYSTEM FOR WATER EXPOSURE CLASS W2-I

In some bathrooms, water exposure is exceptionally high. For instance in level-access showers or in bathrooms where the shower partitions are missing. In these cases, you can fully rely on our Bathroom Plus System.

The main component is our new Waterproofing Membrane Thomsit TDB 100. In addition, the system comprises a tried and tested adhesive and a levelling compound. These products perfectly prepare the substrate and offer reliable, long-term protection against moisture. The high-quality system provides maximum safety in compliance with the test principles laid down for "Bonded waterproofing under tiles".

All system components are environmentally compatible and have been certified as very low emission products.

AREAS OF APPLICATION ACCORDING TO WATER EXPOSURE CLASS W2-I (DIN 18534)

Our Bathroom Plus System offers reliable waterproofing solutions for the following applications in domestic wet rooms:

  • Bathtubs with shower but without shower enclosure
  • Showers with shower tray but without shower partition
  • Shower floors in level-access showers

THOMSIT P 625

2-component PUR adhesive:

  • Hardens irrespective of layer thickness
  • Multi-purpose use
  • Water- and solvent-free

THOMSIT TDB 100 COMBINED WITH TDB 12

Waterproofing membrane and sealing tape:

 

 

•    Especially for use in wet rooms

•    Reliable moisture protection

•    Crack-bridging

•    Easy gluing to the substrate

 

 

 

Please select a product: