Thomsit

Dry bonding of textile, PVC, CV and rubber coverings

Properties

• Rapid renovation technique without drying times
• Secure fixation with built-in breaking point:
  • Strongly adhering upper side
  • Low adhesion backing for easy removal
  • Resistant to plasticizers

Description

The fabric tape Thomsit DT 200 QuickLift® coated with adhesive on both sides, prevents the formation of waves, bumps and blisters when installing floor covering. It is used for the dry bonding of flooring materials of sufficient dimensional stability such as:

• tufted textile coverings with a fleece, foam or textile backing
• carpet tiles
• Noraplan*
• Kugelgarn
• PVC and CV coverings
• Norament*

 Thomsit DT 200 can be used on substrates ready for covering and on firmly attached wear coverings. Suitable for laying carpet on carpet in living areas and in commercial buildings subject to medium loads. However, the existing pile must be not higher than 5 mm and the old carpet not intended for later use. Do not use on natural stone floors (e.g. marble, travertine) and parquet if these floors are intended for later use. Do not use for very unwieldy coverings with high intrinsic stress or equipped with a Texback underside, neither for textile coverings equipped with a PVC backing.

*Follow the flooring manufacturer’s installation instructions. Ask us for suitable flooring types.